Rexnord Couplings

Rexnord Couplings Authorised Distributor - Rexnord Falk Lifelign Gear Couplings, Rexnord Falk Steelflex Grid Couplings, Rexnord Spidalink Couplings, Rexnord Thomas Disc Couplings, Rexnord Falk True Torque Fluid Couplings, Rexnord Viva Couplings, Rexnord Wrapflex Couplings, Rexnord Omega Couplings, Rexnord Addax Composite Cooling Tower Couplings, Autogard Torque Limiters


Rexnord Falk Lifelign Gear Coupling

3 Years Heavy Duty Warranty By Rexnord - *Conditions Apply



The Rexnord Falk Lifelign® gear coupling provides an economical coupling solution. The Lifelign coupling has a large bore capacity with superior torque ratings. Available in both single and double engagement designs.

Features

  • 4 point seal
  • Full depth tooth triple crowning
  • Massive flex hub
  • Non turning prevailing torque locknut

Benefits

  • Improves lubrication retention during misalignment
  • Eliminates tip loading and reduces backlash
  • Provides large bore capacity for economic solution
  • Reliable hold with fewer parts


Rexnord Couplings


Rexnord Thomas SR 71 Disc Couplings


Spacer style flexible metallic disc coupling designed for your pump and compressor applications. The simple three piece design and piloted center member provide fast installation and repeatable balance significantly reducing your installation and service time. The six bolt style offers high misalignment and large axial capacity.


Features

  • Unitized and piloted center member
  • Bolt on hubs
  • Jacking bolt feature
  • Stainless Steel discs standard
  • 6 bolt design

Benefits

  • Ease of installation
  • Repeatable balance
  • Meets API specification
  • Oversize bore capacity
  • Corrosion resistant
  • High misalignment and axial capacity


Rexnord Couplings


Rexnord Falk Wrapflex Coupling





The Wrapflex® is a low cost elastomer in sheer with replace-in-plae element coupling. Easy installation and service without need to move hubs or connected equipment.


Features

  • Torsionally soft
  • Shear design
  • Patented design



Benefits

  • Vibration damping
  • Protects connected equipment
  • Replace-in-place element
  • CRR - increased flexibility
  • Low life time costs







Rexnord Couplings


Rexnord Viva Coupling



The Rexnord Viva® is a unique general purpose elastomeric coupling with split element design providing easy assembly and replace-in-place service. Available in close coupled and spacer sizes. This unique design permits 5X faster installation and reduced inventories by providing multiple distance between shaft ends using the same elements and hubs. Design is perfect for ISO pumps and uses metric fasteners.

Features

  • Split-in-half flex element
  • Torsionally soft
  • Interchangeable hubs
  • Material flexing designs
  • Element "V" notch design


Benefits

  • Simplified assembly and disassembly
  • Excellent vibration damping
  • Low inventory requirements
  • Visual inspection during operation
  • Uniform failure area for overload protection if required





Rexnord

Rexnord Addax Composite Cooling Tower Couplings

Rexnord Addax Cooling Tower Couplings



With more than 50,000 Rexnord Addax Composite Couplings installed around the world, Rexnord has more experience than any other composite cooling tower coupling manufacturer. These couplings are made with lightweight, advanced composite material to increase critical speed, reduce vibration and extend bearing life. As a result, they can reduce overhung bearing loads up to 80% compared to alternative metal couplings. Rexnord Addax Composite Couplings are designed to your specifications and made to order.

Benefits:

  • 13 sizes available
  • Custom spacer lengths up to 275 inches (6,985 mm)
  • Up to 5.06 inches (130 mm) bore capacity
  • Up to 36,200 in-lb (4,090 Nm) torque capacity
  • Up to 500 hp
  • Can span from motor to gearbox without intermediate support bearings
  • Corrosion-resistant parts lower cost of ownership and extend service life
  • Patented unitized flex elements eliminate fretting
  • Can ship in less than 24 hours if required





























Rexnord Elastomeric Spidalink couplings are non lubricated, material flexing couplings. These are used in variety of applications.
Spidalink Couplings have excellent vibration dampening capacity, providing extended life to connected equipment.

Features and benefits

Suitable for drives subjected to higher loads.
Excellent torisional stiffness. Fail - Safe.
Quiet in operation, excellent resistance to oil, dirt and moisture.
Excellent capacity for handling Infrequent Torque spikes.







Rexnord Couplings


Rexnord Thomas SR 718 Disc Couplings


Spacer style flexible metallic disc coupling designed for your pump and compressor applications. The simple three piece design and piloted center member provide fast installation and repeatable balance significantly reducing your installation and service time.



Features

  • Unitized and piloted center member
  • Bolt on hubs
  • Jacking bolt feature
  • Stainless Steel discs standard
  • 8 bolt design

Benefits

  • Ease of installation
  • Repeatable balance
  • Meets API specification
  • Oversize bore capacity
  • Corrosion resistant
  • High torque
  • High speed potential

Rexnord Couplings



Rexnord Omega Couplings




The Rexnord Omega® is a unique general purpose elastomeric coupling with split element design providing easy assembly and replace-in-place service. The Omega is available in close coupled and spacer sizes. This unique design permits faster installation and reduced inventories by providing multiple distances between shaft ends using the same elements and hubs. Design is perfect for NEMA pumps. The Omega is available with standard imperial (standard US) fasteners and metric fasteners.

Features

  • Split-in-half flex element
  • Torsionally soft
  • Interchangeable hubs
  • Material flexing designs


Benefits

  • Ease of installation
  • Excellent vibration damping
  • Low inventory requirements
  • Visual inspection





Rexnord Couplings


Rexnord Grid Couplings

5 Years Heavy Duty Warranty By Rexnord - *Conditions Apply


The Rexnord Falk Steelflex® is a close coupled grid with replace-in-place shot peened, tapered grid for long life. Rexnord offers a five year warranty when installed with long term LTG® grease. The Steelflex is an economical alternative for applications where vibration damping is critical. The replace in place design eleminates the need to move hubs or realign shafts when servicing is required.

Features

  • Alloy steel tapered grids
  • Long term grease (LTG)
  • Replace in place
  • Torsionally flexible

    Benefits

    • Long life
    • Extended maintenance periods
    • Easy maintenance
    • Cushions shock loads
    • Cushions vibrations






















    Rexnord Falk True Torque Fluid Couplings

    Rexnord understands the importance of protecting critical production systems from the effects of damaging shock loads. Falk True Torque Fluid Couplings provide consistently longer, smoother, time-controlled starts with a wide range of starting power torque. Ideal for conveyors using multiple drives, Falk True Torque Fluid Couplings can allow for staggered motor starting and load sharing as well.

    Benefits:

    • 11 sizes and 5 types available
    • Gear, disc, elastomer and grid coupling; hollow shaft and sheave connections
    • Delay, extended-delay, and non delay fill options
    • Up to 7-inch (177 mm) bore capacity
    • Up to 66,000 in-lbs (7,367 Nm) torque capacity
    • Up to 1,500 hp (1,119 kW) power rating
    • Starting power adjustable from 120 to 250% of full-load torque
    • Fluid coupling slip characteristics provide overload protection
    • 1.5-year warranty